Airbrush Machine

This Airbrush machine from Mrs.Highbrow Comes with charging cable and cleaning brushes. 

Airbrush machine

This airbrush machine set contains an airbrush holder that you can charge with the supplied USB cable, the airbrush head, 2 sizes of transparent bottles for the paint, cleaning accessories and an extensive manual. The brush has 3 settings; 22 PSI, 28 PSI and 32 PSI. The 22 PSI setting is generally used for airbrush brows.

The machine has a digital screen where you can see the settings.

Cleaning, defects and warranty

Proper cleaning of the airbrush machine is essential. Incorrect cleaning or use of the wrong products will cause defects, which are not covered by the warranty. Only use liquid with the airbrush machine hybrid paint and special liquid developer or airbrush activator. When using other products it will cause defects.

Clean the machine after every airbrush treatment. Rinse the machine well with water and use the bubble technique.

Airbrush bubble technique cleaning:

• Turn the metal cup of the airbrush and clean it under the tap.
• Turn the largest size plastic cup onto the machine.
• Fill the cup with water, turn on the machine.
• Hold a cotton ball against the nozzle, press the trigger and slowly pull it back.
• Let the water bubble until it is clear. 
• Empty the cup, and repeat two more times.
• Then remove the cotton ball from the nozzle and spray water into a bowl or sink. 
• Remove the cup, and screw the metal cup back onto the machine.
• Spray until no more water comes out. 

Please note: no warranty is given for problems with the general operation of the device. These are caused as a result of incorrect cleaning, incorrect assembly or the use of the wrong products.

Liquid Dye Only
The airbrush can only be used with liquid dye and developer, such as Mrs.Highbrow PowerStain and Airbrush Activator. If you use less liquid paint, your device will become clogged and eventually break.

Specifications:

• 2 positions
• 20-30 PSI / 1.8 Bar
• 295 grams
• Nozzle 0.3mm
• Charging time: 90 minutes
• Battery runs for 50 minutes
• Wireless use
• Input Voltage: 5V/1A
• Power 5W
• Air flow 8-10L/min
• DC: 6VCharging 5v 1A TYPE C
• 74V 1000MAH
• 6 months year warranty

Maintenance: Here's how to clean the Airbrush Machine
After each treatment, rinse the airbrush gun thoroughly. This can be done using a special cleaning pot or using the bubble technique.

• Turn the metal cup of the airbrush and clean it under the tap.
• Turn the largest size plastic cup onto the machine.
• Fill the cup with water, turn on the machine.
• Hold a cotton ball against the nozzle, press the trigger and slowly pull it back.
• Let the water bubble until it is clear.
• Empty the cup, and repeat two more times.
• Then remove the cotton ball from the nozzle and spray water into a bowl or sink.
• Remove the cup, and screw the metal cup back onto the machine.
• Spray until no more water comes out.