Wax Heater ~ Beige

Place the heater on a flat and stable surface. Plug the plug into a wall socket.

Place a layer of approximately 5 cm of wax beads in the jar and put the lid on.

Turn the knob to 125 degrees. The indicator light will turn red, indicating that the heater is heating up.

After the wax has melted, turn the knob to approximately 65 degrees, the perfect temperature when waxing. The light now glows red. Remove the lid from the jar so that the wax cools down to the correct temperature sooner. The light then turns green.

You can also put the wax directly at 65 degrees, but then heating will take longer.

Stir the wax with a spatula to ensure even and efficient heating.

Always test the wax on your wrist first to avoid hurting your customer. The wax should not be too liquid, because then it will be too hot. If the wax is too cool, it will not work properly.

Never leave the pot on unattended.
To switch off the machine: turn the knob counterclockwise to the bottom position (OFF), the indicator light will go off.

Put the lid back on the pot. The wax will cool and harden again. During the next waxing, heat the wax again and add extra granules if necessary.