This airbrush machine from mrs.Highbrow comes with a charging cable and cleaning brushes. Use the machine with the Liquid Mrs.Highbrow Powerstain and Airbrush Activator.
- High quality
- 2 positions
- Lightweight
- Mouthpiece 0.3 mm
- Wireless use
The Mrs.Highbrow Airbrush Set contains:
- 1 x Airbrush
- 1 x Reserve nozzle
- 1 x Pipet
- 5 x Cleaning brushes
- 1 x Air compressor
- 1 x Metal Cup (5 ml)
- 2 x plastic cups (15 & 35 ml)
- 1 x USB-C charging cable
- 1 x Manual
Airbrush
This airbrush machine set contains an airbrush holder that you can charge with the supplied USB cable, the airbrush head, 2 sizes of transparent bottles for the paint, cleaning accessories and an extensive manual. The brush has 3 positions; 22 PSI, 28 PSI and 32 PSI. The 22 PSI position is generally used for airbrush brows.
The machine has a digital screen on which you can see positions.
Cleaning, defects and warranty
Good cleaning of the airbrush machine is essential. In the event of incorrect cleaning or use of incorrect products, defects are caused, this is not covered by the warranty. Use only Liquid Hybrid paint and special Liquid Developer or Airbrush Activator with the airbrush machine. When using other products it will cause defects.
Clean the machine after every airbrush treatment. Rinse the machine well with water and use the bubble technique.
Airbrush bubble technology cleaning:
- Turn the metal cup of the airbrush, and clean it under the tap.
- Turn the largest size plastic cup on the machine.
- Fill the cup with water, turn on the machine.
- Hold a cotton ball against the nozzle, press the tractor and pull it slowly back.
- Let the water bubble until it is clear.
- Empty the cup, and repeat twice more.
- Then you remove the cotton ball from the nozzle and spray your water in a bowl or sink.
- Remove the cup, and turn the metal cup back on the machine.
- Spray until no more water comes out.
Note: no guarantee is given of problems with the general operation of the device. This is because these are caused as the result of incorrect cleaning, the incorrect assembly or the use of incorrect products.
Liquid Dye only
The Airbrush can only be used with Liquid Dye and Developer, such as Mrs.Highbrow Powerstain and Airbrush Activator. If you use less liquid paint, your device will be clogged, and it will eventually break.
Specifications:
- 2 positions
- 20-30 psi / 1.8 bar
- 295 grams
- Mouthpiece 0.3 mm
- Charging time: 90 minutes
- Battery works 50 minutes
- Wireless use
- Input Voltage: 5V/1A
- Power 5W
- Air-Flow 8-10L/min
- DC: 6vcharging 5V 1a type C
- 74V 1000mAh
- 6 months year warranty
User manual:
- Mount the airbrush, cup and air compressor correctly (as shown in the Manual).
- Drip 5 drops of powerstain with 4 drops of airbrush activator in the machine's cup. You keep the lid off.
- Turn the machine on with the button at the bottom. Press 1x for position 1, press 2x for position 2.
- Hold a cotton ball against the nozzle, press the tractor.
- The paint is now going to bubble. The paint is well mixed after about 10 seconds.
- Press the tractor, take it slowly backwards to start spraying.
- First spray on a cotton ball to see if the paint is good in terms of thickness and color.
- After each treatment you clean the airbrush machine, using a cleaning pot or bubble technique.
Maintenance: This is how you clean the airbrush machine
After each treatment, rinse the airbrush gun well. This is possible with the help of a special cleaning pot, or through the bubble technique.
- Turn the metal cup of the airbrush, and clean it under the tap.
- Turn the largest size plastic cup on the machine.
- Fill the cup with water, turn on the machine.
- Hold a cotton ball against the nozzle, press the tractor and pull it slowly back.
- Let the water bubble until it is clear.
- Empty the cup, and repeat twice more.
- Then you remove the cotton ball from the nozzle and spray your water in a bowl or sink.
- Remove the cup, and turn the metal cup back on the machine.
- Spray until no more water comes out.
